X37 China Metal Detector Underground 1m Depth Gold and Metal Detectors Equipment

Model: X37

With reference to the international market technical specifications for metal detectors and environmental test requirements, the technical requirements, test requirements and inspection rules for export products X37 metal detectors are specified as follows.

1. Power Supply:

4000mah lithium battery 3.7V output; The continuous working time is more than 12H.

2. Indicator:

2.1 Visual: LCD LCD display

2.2 Sound speakers or earphones

3. Display and function selection:

3.1 The startup display displays the instrument segment position and the ID digital display in the LCD center. When the object is measured by the machine, the value of the object to be measured will be displayed.

3.2 Standby State If you need to select a function Press to select a function. At the same time, the selected functions can be adjusted or adjusted.

3.3 When metal is detected, the value of the object is displayed in the middle. The more valuable the metal, the higher the value.

4. Menu: There are two detection modes:

AM: All metal detection mode;

DM: identification detection mode;

In AM detection mode:

1. Dynamic detection mode and static detection mode. Select this icon and press or to switch between the two modes.

2. Threshold adjustment: This function can be adjusted only in dynamic detection mode. Key in Dynamic Detection Mode Select this icon and press or to adjust the threshold. The threshold adjustment range is -9 to +9.

3. Tone adjustment: After selecting this icon, press or to adjust the tone during detection. The higher the number, the higher the pitch, and the lower the pitch. Tone values range from -9 to +9.

4. Sensitivity: Press the selected icon, and then press or to adjust the sensitivity size, a total of 1~99 division.

5. Manual balance: Press the selected icon, and then press or to adjust the balance.

In DM mode:

1. Sensitivity adjustment: The adjustment method is the same as that in AM mode.

2. Continuous shielding: Key to select the icon, press or to adjust. The higher the number, the more curved bars on the screen. When the value is small, the arc bars are reduced. Values in the range of values of the arc bar will be masked.

3. Selective shielding: Press the button to select the icon, press or to adjust the value, then the arc bar corresponding to the value will be lit, press the button to confirm, the signal under the arc bar will be shielded.

4. Tone: Choose the right tone according to your personal preference, a total of 11 tone choices. Press the select icon to pass or adjust. The default tone is 2F.

5. Recognition mode: There are 7 scene modes to adapt to various complex detection environments. After the icon is selected, pass or go to select mode. The default mode is dE.

5. Volume:

Press "" "to adjust the volume.

6. (Abbreviation: PP accurate positioning mode)

PINPOINT is used when the user detects the metal within the range during use, but cannot accurately confirm the location of the object. Long press the PP button of the machine, the LCD will display the value, and slowly put the machine down. Go up and down the range. If you measure an object, the value changes. A smaller number means closer to the object. The sound goes from low to loud. (This function can only locate the position and depth of the object, and cannot identify the type of metal.)

7. Balance automatically:

Press and hold the key, move up and down on the ground, when the value is fixed, the balance is shown to be complete. Displays if there is metal in the ground that cannot be balanced properly.

8. Band adjustment: X37 has 7 sub-frequencies F1 to F7. Hold down the key while pressing or to adjust the frequency band of the machine. The same machine will not interfere with each other at close range in different frequency bands.

9. System selection: X37 has DST technology 9.0 system and 9.1 system without DST technology. In the shutdown state, press the column and do not release, and then press to start, at this time the screen will display the system number, press or switch the system according to the demand, and then release and enter the detection state.

10. Restore factory Settings function steps: In the shutdown state, long press or hold, press the boot, the detector starts, release the button, and restore factory Settings.

9. The operating frequency is about 13KHz±0.2KHz

10. Working current:

When no metal is detected, the operating current should be less than 118mA. When metal is detected and the horn sounds, the current should be less than 280mA.

11. Detection sensitivity:

After turning on the machine, adjust the sensitivity () to 75~80, take a 25 cent coin, 35cm above the center of the probe, and move at a constant speed, the LCD screen should have corresponding instructions, while the speaker emits a high sound.

The working mode is placed on PP, take 25 cents coin, 35cm above the center of the probe disk, and slowly approach the probe disk, the LCD screen should have corresponding instructions, and the sound of the speaker has a significant change.

11.1 Temperature:

Operating temperature range: 0℃ (4 hours) ~ +45℃ (4 hours)

Storage temperature range: -20℃ (8 hours) ~ +60℃ (8 hours)