T44 LCD Gold Metal Detector Made in China Metal Sensor Detector Finder on Sale

T44 metal detector meets the international market metal detector technical specifications and environmental test requirements, specific technical requirements, test requirements, inspection rules and other content, such as:

1. Power supply:

3VDC with 2 1.5V batteries; Working hours: not less than 40 hours

2. Indicator:

2.1, visual: LCD LCD display

2.2. Sound speakers or headphones

3, display and function selection:

3.1. 9 different metals are displayed above the startup screen. When the object is measured by the machine, an indication will appear above the corresponding metal.

3.2 The function words on the left side of the standby state are semi-displayed. If you need to select the function, press the MENU key and select the required function back and forth. The selected function word returns from the semi-displayed ghost state to the real state. Select the desired function and press "+" or "-" to increase or decrease the parameters of the machine.

3.3 DEPTH is the depth indication when the object is detected.

3.4 The MODE words on the right of the standby state are semi-displayed. If you need to select a mode, press the mode key to select the required function. The selected function word returns from the semi-displayed ghost state to the real state.

3.5, when detecting metal, the value of the object will be displayed in the middle. The more valuable the metal, the higher the value.

4. Menu:

4.1 SENS: Sensitivity;

Press the MENU key to select SENS. Then press "+" and "-" to adjust the sensitivity. There are 20 levels in total.

4.2 VOLUME: indicates the volume of sound.

Press the MENU key to select SENS. Then press "+" and "-" to adjust the sensitivity. There are 20 levels in total.

4.3 NOTCH: Selective masking.

NOTCH is any one or more metals that users choose to shield precious metals according to their needs or preferences when using the detector.

4.4 GROUND: ground balance;

Press the MENU key to select SENS. Then press "+" and "-" to manually adjust the balance value.

4.5 Small light bulb: backlight function

Press the MENU button to select "Lamp pattern". Then press "+" and "-" to manually backlight brightness, there are 5 stops.

5. Mode:

5.1 JEWELRY: (referred to as: jewelry mode)

This mode is set for finding jewelry.

5.2 COIN: (Coin mode)

This mode only tests US dollars: 5￠, 1￠, 10￠, 25￠, 50￠, 1$

5.3 ARTIFACT: (hereinafter referred to as the Artifact Model)

This mode is configured to find artifacts, small iron objects cannot be detected, and large iron objects are detected

5.4 CUSTOM: (Short for: Custom mode)

This mode allows customers to set a mode according to the metal they want, and the tone can be programmed.

Custom mode Programming tone steps:

① The machine is adjusted to the CUSTOM mode;

Press and hold the MODE key for about 1 second;

③ Press the MENU key to adjust the metal that needs to change the tone;

④ Select the tone by the "+" and "-" keys (0=VCO, 1=bass, 2=low, 3=medium, 4=high).

5.5 A/M: (referred to as: All metal mode)

This mode does not allow any metal to be shielded and is environmentally demanding.

6, PINPOINT (referred to as: PP precise positioning mode)

PINPOINT is used when the user detects the metal within the range during use, but cannot accurately confirm the location of the object. Specific operation to raise the machine detection disk from the ground 8~10CM. Often press the PP button in the middle of the machine, the LCD will display the value 10. Slowly put the machine down. Go up and down the range. If you measure an object, the value changes. A smaller number means closer to the object. The sound goes from low to loud. (This function can only locate the position and depth of the object, and cannot identify the type of metal.)

GG function (automatically balanced)

This feature is to automatically change the detector's internal ground setting to equal the phase of the ground you are searching for, to invoke automatic ground cancellation, which will "get" the base value and store it in the detector.

Steps to restore factory Settings: ① Shut down the machine; Press and hold the MENU key while pressing the Power key (Note: This reset will delete your previous Settings in any mode)

9. Operating frequency 7.7KHZ

10. Working current:

When no metal is detected, the operating current should be less than 30mA. When metal is detected and the horn sounds, the current should be less than 60mA. When the LCD backlight is on, the increased current should be less than 15mA.

11. Detection sensitivity:

After turning on the machine, the sensitivity (SENS) will be adjusted to 9, take a quarter coin, 22cm above the center of the probe, and move back and forth at a constant speed. The LCD screen should have corresponding instructions, and the speaker will emit a high sound.

The working mode is placed on PP, take 25 cents coin, 22cm above the center of the probe disk, and slowly approach the probe disk. The LCD screen should have corresponding instructions, and the sound of the speaker has obvious changes.

12. Temperature:

Operating temperature range: 0℃ (4 hours) ~ +45℃ (4 hours)

Storage temperature range: -20℃ (8 hours) ~ +60℃ (8 hours)

13. Package size

Inner box: 43*32.5*14 cm (L * W * H)

Outer box: 58.5*46*34 cm (4 machines/box)

14. Machine weight:

Single gross weight: 2.95 kg

Gross weight per case: 11.9 kg

15. Color: Black